![]() ![]() Some advantages claimed include higher specific loading, lower power loss and the omission of oil-lift facilities. This bearing material is finding increasing use in North America. In addition to the above basic requirements, the bearing steel should also reach the requirements of appropriate chemical composition, average external organization, less non-metallic inclusions, external appearance defects, and the appearance of the decarburization layer not exceeding the regular concentration.According to published data, some 80% of hydro generator bearings in Russia and associated countries have been fitted with PTFE-faced pads. For example, cold, thermoforming properties, machinability, hardenability, and the like. ![]() In order to satisfy the request of small amount, high efficiency and high quality, bearing steel should have good processing performance. In the course of consumption, bearing parts have to go through many cold and hot processing steps. In order to avoid corrosion and rust of bearing parts and finished products during processing, storage and operation, it is required that bearing steels should have good rust prevention performance. ![]() The hardness of the bearing steel in the application condition has to reach HRC61~65, which makes the bearing achieve high contact fatigue strength and wear resistance. Hardness is one of the important qualities of bearing quality and has an indirect effect on contact fatigue strength, wear resistance and elastic limit. ![]() In order to increase the wear of the bearing parts, maintain the bearing accuracy and stability, and extend the service life, the bearing steel should have good wear resistance. In the bearing task, not only the rolling friction between the ferrule, the rolling element and the maintenance frame occurs, but also the sliding friction occurs, so that the bearing parts are always worn. Therefore, in order to improve the service life of the bearing, the bearing steel must have a high contact fatigue strength. Under the action of cyclic load, the bearing is easily exposed to fatigue damage, that is, cracking and spalling, which is an important damage situation of the bearing. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. Archives
December 2022
Categories |